English
内页-产品中心banner

Detail

CQB Fast Colour Change Powder Coating System and Powder Recovery System

CQB Fast Colour Change Powder Coating System and Powder Recovery System is constructed in the latest design for modern plastic sandwich booth. Flexible touch up stations are located at both ends of the spray booth. Excellent air flow design ensures high transfer efficiency of powder. Minimal down time in cleaning and colour change. Conform to the latest European ATEX Safety Requirement.

Benefits:

1.Elegant and stylish design.
2.The booth is manufactured from special engineering plastic which will enable fast colour change and higher transfer efficiency of powder coating.
3.The roof is designed with wide-angle to eliminate dead corners and reduce colour change down time.
4.Downward air stream to ensure a steady and efficient extraction.
5.Good lighting system.
6.Flexible touch up station.
7.Compact design.
8.The overall spray room is designed according to safety standards.

Combination Module

  • DDF Powder Pump and Control System

    The powder pump is the heart of all powder coating systems and the latest DDF4 powder pump from Ramseier Koatings can achieve high powder density and low velocity delivery.

    More

  • PMC Close Circuit Powder Management Center

    The closed circuit powder management system is designed to work with the DDF pumps so that the powder can be delivered in the HDLV manner to the guns. The stable and consistent powder delivery to the guns ensures the long term performance of the Soft Spray technique and a consistent evenness in the coating.

    More

  • Reciprocator

    We can offer the ER, HDR and SR series in order to meet the different requirements, so that the optimal performance could be delivered.

    More

  • Automatic Powder Coating System

    The Ramseier Koatings Smart 600 electrostatic powder coating gun and control system has benefited from the latest development in digital electronic and the latest "Total Charge Control" (TCC) electrostatics technology which has made the S600 one of the most user friendly and reliable high performance spray guns in the world.

    More

  • Manual Electrostatic Powder Coating Equipment

    The Ramseier Koatings Smart 600 electrostatic powder coating gun and control system has benefited from the latest development in digital electronic and the latest "Total Charge Control" (TCC) electrostatics technology which has made the S600 one of the most user friendly and reliable high performance spray guns in the world.

    More

  • Control Cabinet

    The use of the advance and user friendly SCU-S600 System Control Unit will enable the integration of the setting of all the electrostatic and pneumatic values for the spray guns under one control unit.

    More

  • KLC Series Mono Cyclone Powder Separator

    When changing colour, the operator only needs to clean the lower and top part of the cyclone powder separator. So the colour change is simple and quick Recovery efficiency is 95% - 98% for standard powder. The fines separated from the reclaimed powder will be collected and filtered out by the filter elements for disposal in order to ensure top quality finish for the products.

    More

  • KF Series “Swing Wing” Type Filter Unit

    KF series filter are fitted with “Swing-Wing” cartridge filter cleaning system. The Swing-Wing device inside the cartridge filter will ensure high efficiency in cleaning the surface area of the cartridge filter. An advance automatic cartridge filter cleaning monitor system is fitted to ensure the long term performance of the filter.

    More

Return

Online
Service